edm solar 90W.png
 Solar Industrial 90W PoE Injector Support SFP Port
►1-port 10/100/1000BASE-T RJ45 with auto MDI / MDI-X function
► 1 SFP Port, 100Base-FX or 1000Base-X dual mode (auto detection)
► IEEE802.3bt PoE++ (90W)
► Supports Link Fault Pass Through
► Supports Full/Half-duplex, Auto-negotiation
► 9K Bytes Jumbo Frame
► 12~48VDC Terminal Block Power Input
► Supports DIN-Rail & Wall-mount installation
► Environmentally hardened -40°C to 75°C (-40°F to 167°F) operating temperature


Ethernet Standards:

IEEE802.3 10Base-T

IEEE802.3u 100Base-TX/FX

IEEE802.3ab 1000Base-T

IEEE802.3z 1000Base-X

IEEE802.3af Power over Ethernet

IEEE802.3at Power over Ethernet

IEEE802.3bt Power over Ethernet


Processing Type:



Forward Filter Rate:

14,880pps (10Mbps)

148,800pps (100Mbps)

1,488,000pps (1000Mbps)

Packet Buffer Memory: 1 Mbit

Max Packet Length: 9K Bytes

Address Table Size 2048K MAC Addresses



Connector: 1x RJ45

Optical Port: 1 x SFP 1000Base-X or 100Base-FX (auto detection)


Electrical and Mechanical

Input Power: 12~48VDC, 2-pin terminal block

Power Consumption: 65W Max.

LED Indicators:

PWR: Power Status

PoE: PD Plug Status

RJ45: LINK/Activity



Dimensions (WxDxH): 96 x 80 x 31 mm

Weight: 0.25Kg

Casing: Aluminum Case

Mounting Options: DIN-Rail / Wall-mount



Operating Temperature: -40°C to 75°C (-40°F to 167°F)

Storage Temperature: -40°C to 85°C (-40°F to 185°F)

Relative Humidity: 5% to 95% non-condensing MTBF > 200,000 hrs

solar injector 60W.jpg
Solar injector 60W.jpg
solar injector 60W .jpg